installation of a flush mounted kitchen sink - learn how easy it can be

by:Top Home     2019-12-11
There are different types of sink designs.
One of them is the kitchen sink installed flush.
This type of sink is installed under the countertop.
This will make it look more attractive compared to the regular sink.
This will also increase the quality of the family.
Flush-mounted features provide a cleaner finish for the countertop.
This task can be done easily with the help of appropriate tools and pipeline knowledge.
This will also save the cost of hiring plumbers and be satisfied and proud of this achievement.
Before installing the flush-mounted kitchen sink, please prepare the required tools and equipment.
Includes the following: * flush mounted kitchen sink * caulking gun * sink clip * silicone * tape measure * round saw * saw horse * pencil * 2x4 * Tube wrench * crescent wrench * flat screwdriver the first step is to turn off the water and main water supply.
Use a crescent wrench to remove the water line from the old sink.
Use a pipe wrench and remove the pipe as well.
The old sink clip was then removed as well and made sure the old sink was lifted.
Now measure the holes in the old sink with a tape measure and with the new sink to make sure it fits there evenly.
The next step is to dry and install the new kitchen sink from the lower part of the counter.
Put on 2x4 at the saw right away and then measure the saw.
After measurement, cut it into the required size of the saw.
Hold the sink firmly, adjust the sink, then pick up the pencil and outline the outline from the lower part of the tank table.
Use a silicone tube to remove the sink.
Use a caulking gun to bypass the edge of the top of the sink.
Now put the sink back in the outline and fix it in place using 2x4.
Place silicone and rubber washers at the bottom of the faucet and tighten all bolts.
Finally, it\'s time to put the drain together.
Tighten it, then plug the water tank in the kitchen and open the water.
Also check whether the water pipe leaks.
If there is no leakage, remove it and let the water pass.
If there is a leak, protect the pipe by tightening it.
This is the best way to be completely safe and make sure everything is in good condition.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...