how to install a freestanding bathroom sink?

by:Top Home     2019-12-14
Bathroom sinks are essential for any restroom.
You can\'t imagine the bathroom space without the sink.
There are several types of sinks on the market, suitable for different types of needs and spaces.
In the bathroom, the space is a problem, or The Dresser takes up a lot of space, and the separate bathroom sink is considered ideal.
The separate bathroom sink is the best way to hide the pipes.
You can install the stand-alone sink with the help of plumbers in a day\'s time, however, if you have the knowledge of installing pipe fixtures, it can be done easily in just a few steps. 1.
Turn off the water source: In order to avoid water in the bathroom, all water supply from the bathroom or sink must be closed (
If it\'s separate).
You should turn off the water source before removing the previous sink. 2.
Remove the previous sink: the previous sink must be carefully removed before starting to install the new one.
As long as the measurement results are the same, you can use the same pipe for the new sink, thus reducing the budget and Labor for the new installation.
You can loosen the nut around the tap with a wrench.
If the nut is too tight or corroded, you can use oil, WD-
40 or any penetration oil used to tighten the screws.
It will help to remove easily. 3.
Measurement: you must measure before drilling for a new sink.
It will help to hole in exactly where needed.
After measuring, you can drill holes. 4.
Water supply connection: connect the water supply pipe to the main connection against the wall.
If not, you have to make one from the main water supply leading to the bathroom.
After the connection, the nut must be fixed and fixed with the thread to prevent leakage or loosening. 5.
Drain connection: no drain connection, no sink is complete.
The sink will have room for the drain so you can connect it properly.
Make sure to be firm on the sink and main drain assembly to avoid water leakage in the bathroom.
You can also cover the seams of the drain pipe with a caulking agent. 6.
Fastening bolts: since the connection is complete, you can install and fasten the stand-alone sink on the wall and/or on the floor. 7.
Connecting the faucet: After the installation is completed, the faucet can be connected to the sink. 8.
Start the water supply: to check if you have done everything right, start the water supply and look for any leaks.
Make sure the wastewater pipe is drained in an appropriate way, and the cold and hot water dragon head line also works accordingly.
If you do not know the tools and procedures for installing a separate sink, it is better for housewives to accept the help of a professional plumber.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...